Aluminum frame high efficiency air filter

 News     |      2021-12-09 18:22
Product introduction of aluminum frame high efficiency filter:
Simply put, the outer frame of the high-efficiency filter is made of aluminum alloy. In fact, all plate-type high-efficiency filters can be made of aluminum alloy outer frame, and the surface of the aluminum alloy frame is anodized.
Advantages: energy saving, environmental protection, reusable.



Aluminum profile thickness: optional 46mm, 50mm, 69mm, 80mm, 96mm, 100mm, 120mm, 150mm, 220mm.

If it is not the above thickness, you can choose aluminum folding frame.
1. Aluminum frame high efficiency air filter | Aluminum frame high efficiency filter (with partitions)
Product features of high efficiency filter with partition aluminum frame:
1. Adopt clapboard design, corrugated clapboard can accurately maintain the distance between folds.
2. With the least resistance, make the most of the filter material.
3. 180 pleats on both sides of the filter material are folded to form a wedge-shaped pleated layer. When the filter material is bent, there are two indentations to form a wedge-shaped box pleated layer at the end of the partition. The wedge-shaped box fold layer can be Prevent damage to the filter material.
4. In corrosive environments, vinyl-plated separators can be used to capture 0.3μm particles with an efficiency of 99.99%.
5. Aluminum frame HEPA filter|Aluminum frame HEPA filter (without partition):

Product features of high efficiency air filter without partition:

1. The high efficiency air filter manufacturing technology ensures the effectiveness of the V-shaped channel.
2. Aluminum profile frame, surface anodized, with metal protective net on the air inlet and outlet, which is firm, efficient and easy to handle.
3. Unique seamless sealing technology, the sealing effect is longer and not easy to leak, and the air flow is even.
4. Grade of high efficiency air filter without partition: H13-H14 (Note: refer to the filtration efficiency of high efficiency filter), filter element material: glass fiber;
5. Determine the required air volume of the required filter (the rated air volume is below 0.45m/s);
6. Determine whether the size of the required filter and the installation method are appropriate;
7. Determine whether the filter has special requirements, such as liquid tank sealing, DOP testing (Note: You can refer to the leak detection method of high-efficiency filters), etc.
The advantages are summarized: anti-aging technology, not easy to deform, low resistance and long service life.