6060 chrome aluminium facings square corner frame

At present, the mirror frames used in society are generally sold and preserved in the form of frames. When in use, put the picture or mirror in, and then seal it with pressure strips or small nails. When it is not in use and needs to be stored, the entire frame can only be stored, and cannot be disassembled for storage. At most, the picture or mirror can only be taken out and stored separately. Such a fixed frame structure is not conducive to mass production, storage and transportation, and affects the mass production and use of mirror frames.
The purpose of the utility model is to provide a 6060 chrome aluminium facings square corner frame with a unified structure, easy mass production, convenient disassembly and assembly, and solve the deficiencies of the existing mirror frames.
The purpose of the utility model is achieved as follows: First, a 502 type 6060 chrome aluminium facings square corner frame is designed, on which there are connecting grooves and placement grooves. According to the production needs, the 502 type special-shaped aluminum material is cut into a fixed length at an end angle of 45°. The two 502 type special-shaped aluminum materials with 45° end angles are connected by the expansion screw through the angle iron to form the frame of the mirror frame. When you need to store it, you only need to loosen the screws and remove the angle iron, and you can take it up and store it at any time.



As 6060 chrome aluminium facings square corner frameIt can be mass-produced on a large scale, so the utility model is suitable for mass assembly production, which is beneficial to reduce costs and meet the social demand for mirror frames.